Recent content by Toyluv

I went out and changed both drum sets. It was the toe if the brake shoes which was outside the lower plate. Once I changed this, I had to really screw in the adjuster screw. Put the tires on and bleed them. Stops on a dime. No leaking issues. Thanks Everyone! That really helped...

Wow, thanks PLBear. I know I'm not behind that bolt by looking at your picture. I'm going to change that and post later. I know that is going to be good info.

Okay. I agree. I will take her down again and look for anything on the left that stops the piston from coming out or freezes that shoe.

What if I adjust that tensioner all the way down?

Yes, that's right. The right boot is askew and not sealed properly due to the rod pushing it out. That's the problem. Scott - I believe they are made in China. Should I use different? Its from OReillys. Just a note: I notice this is teh original problem with the original cylinder that...

I note the end of the shoe fits into the slot on the cylinder. Once all together, I can shift it all about a cm to put drum on.

http://s44.photobucket.com/user/Quikpic/library/

Sorry. I used photo bucket but must have used site link wrong here. I used the picture icon for the image referral link at photo bucket. My link: <iframe width="480" height="360" src="http://s44.photobucket.com/user/Quikpic/embed/slideshow/"></iframe>

Pic of cylinder This was from last night. Cylinder shows pushed out to right. Is the left held by something? When the adjuster spring is off. They both fall to their side. I will take more pics when the sun comes up.

Emergency brake?

Cylinder Picture of cylinder

The adjuster that keeps the shoes a certain length apart with a wheel screw? Maybe the spring here? What keeps this piston from coming too far out? Why does the other side stay in? Could something on the left shoe be hung and keeping it rigid when together? I can move the whole...

Pic