Search results

  1. Chris Denton

    Just sayin...

  2. Chris Denton

    K&N failure

    First off, sweet ride! We can't tune our ECU's here in the states either. Best of luck! Sounds about right with the new intake. Congrats BTW!! You will notice a huge difference if you put at least a cat back exhaust. Also, if you can get them where you live, install a MAFS from jetchip.com
  3. Chris Denton

    No place to mount my amps?

    It's a lot like programming a vcr back in the day! Let me know what NASA says!!
  4. Chris Denton

    Low idle will in drive.

    Has anyone heard of the iOBD2 mini? I had another post about this but no one responded. It's a Bluetooth dongle that plugs into your OBD port that links to your smartphone. It gives you real time engine information and other features such as gas mileage, MAFS, speed, idle. The cost was around...
  5. Chris Denton

    Low idle will in drive.

    Mine idles around 800 unless the AC or defrost is on. Then it's between 500-600. Has always been this way. Doesn't matter if I had stock intake, short ram or cold air. I have also used premium gas in it since day one, but that's another conversation I don't want to start! Lol
  6. Chris Denton

    Hella horns or Sickspeed horns?

    I wipe it down if I'm doing anything. Which is often. It's still kinda new though. Almost 10k in 3 years. Plus, I rarely drive it in the rain or any other bad weather and it lives in my garage. OCD helps too! Lol! But to answer your question, I use the same stuff I would use on the interior...
  7. Chris Denton

    First Time With Corolla - 1 week in

    Yes, unpainted. I didn't see any that were already painted. You could try junk yards too. Maybe a white S got rear ended or something. Would probably be cheaper to have the front fixed. I don't know what to tell you about that spot on the rear door though.
  8. Chris Denton

    First Time With Corolla - 1 week in

    Always from when your sitting inside the car. Left is drivers side. (assuming your in a North American Corolla)
  9. Chris Denton

    ESR & PLASTI DIP

    Opinions?
  10. Chris Denton

    Hella horns or Sickspeed horns?

    I went with OEM. Sickspeed horns are still in the box.
  11. Chris Denton

    First Time With Corolla - 1 week in

    https://toyotaparts.toyotaofclermont.com/p/Toyota_2015_CorollaCVTS/Bumper-Cover--Front-WS-MODEL/51297056/5211903906.html Just in case!
  12. Chris Denton

    First Time With Corolla - 1 week in

    https://toyotaparts.toyotaofclermont.com/p/Toyota_2014_CorollaCVTS/Door-Mirror-Cover-Mirror-cover--Front-Left-wturn-signal-white/54594424/8794502420A0.html
  13. Chris Denton

    First Time With Corolla - 1 week in

    You didn't scroll down far enough.
  14. Chris Denton

    2014 Hood Deflector Installed

    Gotcha I've only seen that here in the forum.
  15. Chris Denton

    First Time With Corolla - 1 week in

    https://toyotaparts.toyotaofclermont.com/a/Toyota_2014_CorollaCVTS/_56655_6429091/OUTSIDE-MIRRORS-FRONT-DOOR/8429435.html
  16. Chris Denton

    First Time With Corolla - 1 week in

    I use Toyota touch up paint that I bought on Amazon. But all you need is your paint code that's on a sticker in the drivers door jam, and then look it up on Amazon. I'll post a link to the covers in a minute.
  17. Chris Denton

    2014 Hood Deflector Installed

    Which one are you talking about?
  18. Chris Denton

    2016 Toyota Corolla subwoofer install

    If you buy the aftermarket radio harnesses, there is a list of what wires do what. I'm rewiring mine right now, so I know the blue with white strip is the remote turn on, but that's on the harness that I bought. I just ran a 1/0 power cable to the rear. What a pain. But it's done now! Went...
  19. Chris Denton

    Hella horns or Sickspeed horns?

    That all depends. I made my own wiring harness with factory connectors and only added the high tone OEM horn. However, I can install the sickspeed horns and just plug them in whenever I want. If your going to replace the OEM horn with aftermarket units, you'll probably have to cut off the...
Top