Hey all, so I recently drove from Wyoming to Arizona for a month long vacation. So I had a bunch of junk loaded up and on the way here I noticed that I was bottoming out really bad in the back for really big bumps. Once here, I noticed that the rear end seemed to be sagging real bad. So I finally took the chance to jack the rear end up, and sure enough one of the struts is leaking (I think that's the name for it, the shaft in the center of the rear coil spring). So I wanted to get a few opinions from everyone. First off, would this be what's causing the sagging? I know it would cause the bottoming out, but not sure about the sagging while parked with no weight in it. Also I wanted to know how long I could go with this. I'm planning to head back to Wyoming in about a week, and can't decide if I should replace the suspension here in Arizona or wait until I'm back to Wyoming. It's about a 900 mile drive (mostly interstate) but I would be loaded up with some junk. The main reasons I want to wait, are it's a lot nicer to work on things in 80 degree weather rather then 110 degree weather. Also I have my corolla book that will have all the torque specs back in Wyoming. What's everyone's opinion on what I should do?