Search results

Looks neat. I'd have to hear how the exhaust sounds with that and the Borla system before buying. I don't want the killer bees exhaust.

I've had them fly off on my Focus >.< The longer you wait though, the more messy it woulda been. Glad you didn't have to take glue solvent to it. Always fun to work with that stuff around paint...

^this

My Pioneer didn't have it :-(

How do the cables look? Any fraying or signs of corrosion on the connections?

Yeah, considering that all OEM premium stereos have steering wheel bluetooth controls (and even base models are starting to come with this), you figure they would start implementing it... Maybe in another couple years?

The shifting may or may not be related to the battery. Depends on if the automatic is controlled by electronics or not. Sounds like with the battery moving around it broke a plate internally and no longer produces 12 V. Get a multimeter and measure the battery voltage with everything off. It...

I haven't seen a kit for any Corolla that drops past 2". Dropping past 2" requires more than just a coil-over kit ... you need a bump-steer kit and caster/camber plates or you are running the steering geometry out of parameter ... and on a '95 Prizm? I'd put the money into a project car or...

Yes. Oil pan drain is a 14mm. If it is on tight, you can use the box end of the wrench and use your foot and push on it to break it loose. Tighten it with just your pointer and middle finger on the wrench and that will get you close enough to torque specs. You don't want to overtighten the...

There might not be a standard yet for Bluetooth controls on aftermarket stereos ... but I don't see why that won't change in the near future. Aftermarket stereos have only had built-in Bluetooth for the last couple years now. Before you had to buy a separate bluetooth component and hook that...

Yeah. It is rare that cars overcharge but I have seen it before and it can get ugly. I just don't see all of these failures coming out of thin air at the same time. There's gotta be an underlying explanation for it all :-\

Beautiful Coupe. Did a hell of a job caring for it over the years. Is that the original paint?

Sounds legit.

They are generally held on with double sided tape. You may have glue to remove but if they weren't on the car for that long, then you may get lucky and have it peel off without a mess.

Is Dodge still making the Caravan? I thought they were talking about pulling the plug on it. Seems like crossovers are the new thing now. I was looking at a Volvo C30 ... car had a completely flat torque curve from 1500 to 6000 rpm (similar engine to the 2nd generation European Focus RS/ST...

Which relay is that? High beams relay? Any chance you can measure the voltage of your battery as the engine is running? With all of these electrical gremlins surfacing at once ... I'm wondering if your voltage regulator on the alternator is malfunctioning and overcharging the car (Anything...

Also, if you want to see my LEDs go on the 2014 Corolla section and search for my threads. I have one for the interior, another for the reverse lights, another for the brighter reverse lights + brake lights, and another for the fog lights.

Robb, there is plastic that pretty much encases half the bulb for the entire length, so oversized won't fit. I have a 4-LED 31mm I got off superbrightleds.com. I found a 6-LED version that is just slightly oversized from vleds.com so I need to get the measurement and see if it will fit in mine...

Don't be a baby about it. Man up, own your mistake, LEARN from it, and fix it so other people don't damage the vehicles that they paid hard-earned money for. I will happily chew out a manager or a supervisor at my work for following a procedure that will damage a part or create scrap. Nobody...

MG CLT? Must be Japanese for AC CLT :-X